[ADVPushButton]
gbp2_1=Configuration Option
rbAdvSetup=Advance Setup
rbQEZSetup=Quick&Easy Setup
gbp2_3=Application Controller
InstStop3bEvent=Stop 3-byte events on Activation
InstAGSmartEngine=Send DALI Dimming actions on Activation
lbINDMD=Indicator Mode:
lbINDRGB=RGB Adjust Lv:
InstAGIndicator=Fixed on Action 1;Fixed on Action 2;Fixed on Action 3;Fixed on Action 4;Fixed on Action 5;Fixed on Action 6;Fixed on Action 7;Fixed on Action 8;Follow on Action No.;Flashing on Action 1/2;Follow Press/Release;Unknown Mode
gbp2_4=Button Action Timing Parameters (DALI Events)
lbSHTMER=Short Timer:
lbDBTMER=Double Timer:
lbRPTMER=Repeat Timer:
lbSTTMER=Stuck Timer:
gbp2_5=Control Target
lbDMTG=Dimming target:
lbIIUCTRL=Inter Input Unit Control (The target to send Instance Enable/Disable)
gbp2_6=Button Behaviour Action
actionPress=Action 1;Action 2;Action 3;Action 4;Action 5;Action 6;Action 7;Action 8;Rotation Actions;Moving Actions;Recall Memory;Moving Up;Moving Down;None;None;None
actionDouble=Action 1;Action 2;Action 3;Action 4;Action 5;Action 6;Action 7;Action 8;Rotation Actions;Moving Actions;Recall Memory;Moving Up;Moving Down;None;None;None
actionRelease=Action 1;Action 2;Action 3;Action 4;Action 5;Action 6;Action 7;Action 8;Rotation Actions;Moving Actions;Recall Memory;Moving Up;Moving Down;None;None;None
actionLongStart=Action 1;Action 2;Action 3;Action 4;Action 5;Action 6;Action 7;Action 8;Rotation Actions;Moving Actions;Recall Memory;Moving Up;Moving Down;None;None;None
actionClick=Action 1;Action 2;Action 3;Action 4;Action 5;Action 6;Action 7;Action 8;Rotation Actions;Moving Actions;Recall Memory;Moving Up;Moving Down;None;None;None
actionLong=Action 1;Action 2;Action 3;Action 4;Action 5;Action 6;Action 7;Action 8;Rotation Actions;Moving Actions;Recall Memory;Moving Up;Moving Down;None;None;None
actionLongStop=Action 1;Action 2;Action 3;Action 4;Action 5;Action 6;Action 7;Action 8;Rotation Actions;Moving Actions;Recall Memory;Moving Up;Moving Down;None;None;None
lbPACT=Press Action:
lbDCACT=Double Click Action:
lbRACT=Release Action:
lbLSACT=Long Start Action:
lbCKACT=Click Action:
lbLRACT=Long Repeat Action:
lbLPACT=Long Stop Action:
actOverEv1=Work on above Action 1
gbp2_7=Control Action Pool
lbMXACT=Max Action Size:
lbRSTMER=Resend Timer:
lbPODEF=Power-On Default:
lbDAIIA=Dimming Action,\r\nInter-Input Action
lbINDL=Indicator
lbRSNL=Resend
laACTN1=Action 1
laACTN2=Action 2
laACTN3=Action 3
laACTN4=Action 4
laACTN5=Action 5
laACTN6=Action 6
laACTN7=Action 7
laACTN8=Action 8
doEnable1=Do Enable
doEnable2=Do Enable
doEnable3=Do Enable
doEnable4=Do Enable
doEnable5=Do Enable
doEnable6=Do Enable
doEnable7=Do Enable
doEnable8=Do Enable
doDisable1=Do Disable
doDisable2=Do Disable
doDisable3=Do Disable
doDisable4=Do Disable
doDisable5=Do Disable
doDisable6=Do Disable
doDisable7=Do Disable
doDisable8=Do Disable
indRP1=On
indRP2=On
indRP3=On
indRP4=On
indRP5=On
indRP6=On
indRP7=On
indRP8=On
INDColList=None;Blue;Green;Cyan;Red;Magenta;Yellow;White
gbp2_8=Interactive Switch (Tracking Mode)
gbp2_8a=3-Byte Tracking
lbEVTID=Event ID:
lbINSTN=Instance:
trackSendEvent=Track and Send Tracking Event Above:
track3BEnable=Track 3-byte Enabling Commands
track3BDisable=Track 3-byte Disabling Commands
trackResendEnable=Resend Enable on Tracks
trackResendDisable=Resend Disable on Tracks
gbp2_8b=2-Byte Tracking 
track2BDim=Enable 2-Byte Dimming Tracking
track2BAddr=Enable Sub-Group/Device Tracking
InstAGEffALL=Include ALL
InstAGEffUNADDR=Include Unaddressed
track2BForce=Force to Default State on subgroup or members
lbUMDEFS=Unmatch Default State:
InstAGDefault=Action 1;Action 2;Action 3;Action 4;Action 5;Action 6;Action 7;Action 8;Unchanged
evPODef=Action 1;Action 2;Action 3;Action 4;Action 5;Action 6;Action 7;Action 8;Last Action
gbp2_8c=2-Byte Target's Sub-Groups
gbp2_8d=2-Byte Target's Sub-Units
gbp2_3c=Action Type
smpOnOff=On/Off Switch
smpDelayOnOff=Delay On/Off Switch
smpOneSwitch=One Switch Button
smpLongDimmer=Long Press Dimmer
smpLongScenes=Long Press Scenes
smpUnknown=Unknown
smpUseTwoWay=Use two-way tracking
smpPaddle=Paddle switch mode
lb5DMTG=Dimming target:
gbp2_4c=Levels
lbARLV=Arc Level
lbIDLV=Indicator Level
lbTOFF=Turn Off:
lbTON=Turn On:
lnMinOn=Minimum On:
lbIDMSTP=Indicator for middle steps
lbDMSTP=Dimmer Steps:
gbp2_5c=Scenes
lbNOSC=No. of Scenes:
lbFDLSC=First DALI scene No.:
lb6IDLV=Indicator Level
gbp2_5d=Quick Scene Amender
lbALV2=Arc Level
lbCLTMP=Color Temp.
lbTOFF2=Turn Off:
lbTON2=Turn On:
lbMINO2=Minimum On:
btnUPDSC=Update devices' scenes
lbDYTM=Delay Time:
lbMsMX=mS (max: 5080)
COLTXTs=None;Blue;Green;Cyan;Red;Magenta;Yellow;White
BLVTXTs=0;1;2;3;4;5;6;7
btnDWN=Download
btnUPL=Upload
btnRST=Restart
btnCLN=Clone
btnUPALL=Upload All Instances

msgK01=Group #
msgK02=Instance #
msgK03=Device #
msgK04=Luminaire #
msgK05=To All
msgK06=To Unaddressed
msgK07=To Event
msgK08=Level: %0% (%1%/254)
msgK09=0xff, immediately apply
msgK10=Turn On
msgK11=Turn Off
msgK12=Dim Up
msgK13=Dim Down
msgK14=Step Up
msgK15=Step Down
msgK16=On/Step Up
msgK17=Step Down/Off
msgK18=Goto Scene #
msgK19=Wamer CT
msgK20=Cooler CT
msgK21=X Coordiate Up
msgK22=X Coordiate Down
msgK23=Y Coordiate Up
msgK24=Y Coordiate Down
msgK25=Call Warmest CT
msgK26=Call Coolest CT
msgK27=NONE
msgK28=Are you sure to upload this controller's all advance parameters? Select Yes to continue.
msgK29=Upload advance parameters

[ADVLightSensor]
gbp2_1=Application Controller
InstAG3Byte=Stop 3-byte events on Activation
InstAG2Byte=Send DALI Dimming actions on Activation
Inst10Bit=Sensor Resolution: 10 bits
gbp2_2=Sensor Controls
lbDDTMER=Dead Timer:
lbRPTMER=Report Timer:
lbHTSS=Hysteresis:
lbHTSMIN=Hysteresis Min:
gbp2_3=Light Sensor Sentive
lbSSTV=Sensitivity:
lbMXLX=Max Lux: 
lbLSDE=Lense Derate:
lbRPRNG=Report Range:
lbRNG=(Rang: 0 ~ 65534)
gbp2_4=Smart Engine
lbCTLMD=Control Mode:
lbDMTG=Dimming target:
gbp2_5a=Smart Dimmer Action
lbCMDS=Command
lbTHD=Threshold
lbACT1=Action 1:
lbACT2=Action 2:
lbACT3=Action 3:
lbACT4=Action 4:
lbACT5=Action 5:
lbACT6=Action 6:
lbACT7=Action 7:
lbACT8=Action 8:
gbp2_5b=Light Level Adjustor Parameters
lbTGLV=Target Level:
lbTONA=Turn On Arc:
lbADRT=Adjust at Rate:
lbMINA=Minimum Arc:
lbADSTP=Adjust Steps:
lbLMLUX=Luminaire Lux:
btnGLMLX=Get Luminaire Lux
InstAdjOnUp=Quick Adjust on Dim-Up only
InstDimOffBy103=Dim to off when disabled by 103
InstOnOffByDim=Start/Stop by external dimming commands. (lv 0 = stop, lv 254 = start)
lbTTOFF=Time to off:
btnDWN=Download
btnUPL=Upload
btnCLN=Clone
InstWorkMode=1 Level Mode;2 Levels Mode;3 Levels Mode;4 Levels Mode;5 Levels Mode;6 Levels Mode;7 Levels Mode;8 Levels Mode;Light Level Adjustor
litSenSv=1x: 1 per 1 lux;2x: 1 per 0.5 lux;4x: 1 per 0.25 lux;8x: 1 per 0.125 lxux;Reserved;Reserved;48x: 1 per ~0.02 lux;96x: 1 per ~0.01 lux

msgK01=Group #
msgK02=Instance #
msgK03=Device #
msgK04=Luminaire #
msgK05=To All
msgK06=To Unaddressed
msgK07=To Event
msgK08=Level: %0% (%1%/254)
msgK09=0xff, immediately apply
msgK10=Turn On
msgK11=Turn Off
msgK12=Dim Up
msgK13=Dim Down
msgK14=Step Up
msgK15=Step Down
msgK16=On/Step Up
msgK17=Step Down/Off
msgK18=Goto Scene #
msgK27=NONE
msgK28=Are you sure to upload this controller's all advance parameters? Select Yes to continue.
msgK29=Upload advance parameters
msgK30=Unknown
msgK31=Max Lux: 
msgK32=Sensor Range: %0%lx ~ %1%lx\r\nPer reported point of value: %2%lx

[ADVOccupancy]
gbp2_1=Application Controller
InstAG2Byte=Stop 3-byte events on Activation
InstAG3Byte=Send DALI Dimming actions on Activation
gbp2_2=Sensor Detection Parameters
lbMTHD=Method:
lbSNSV=Sensitive:
lbWNDW=Window Time:
lbSMSES=Smart Sensitive:
gbp2_3=Sensor Controls
lbDDTMER=Dead Timer:
lbRPTMER=Report Timer:
lbHDTMER=Hold Timer:
lbACBLUX=Active below Lux:
btnGCRLX=Get Current Lux
gbp2_4=Smart Engine - Controlling Target
lbDMTG=Dimming target:
lbINIDS=Input Unit (The target to send Instance Enable/Disable)
gbp2_5=Smart Dimmer Action
lbDMCMDS=Dimming Command
lbIUNIT=Input Unit
doEnable1=Do Enable
doEnable2=Do Enable
doDisable1=Do Disable
doDisable2=Do Disable
lbVACANT=Vacant
lbOCCPY=Occupy
btnDWN=Download
btnUPL=Upload
btnCLN=Clone
InstWorkMode=Purse Trigger;Smart Trigger

msgK01=Group #
msgK02=Instance #
msgK03=Device #
msgK04=Luminaire #
msgK05=To All
msgK06=To Unaddressed
msgK07=To Event
msgK08=Level: %0% (%1%/254)
msgK09=0xff, immediately apply
msgK10=Turn On
msgK11=Turn Off
msgK12=Dim Up
msgK13=Dim Down
msgK14=Step Up
msgK15=Step Down
msgK16=On/Step Up
msgK17=Step Down/Off
msgK18=Goto Scene #
msgK27=NONE
msgK28=Are you sure to upload this controller's all advance parameters? Select Yes to continue.
msgK29=Upload advance parameters
msgK30=Type: 
